page:8/16
Instructions
IMPORTANT!: To ensure ease of assembly please verify the size and
quantity of all the required assembly hardware and parts with the enclosed
parts list and full size hardware chart.
Each step of the assembly process has been broken down into 7 easy-to-follow
stages. Please take just a few moments to read over these instructions to
familiarize yourself with the process to make assembly quick and trouble-free.
Assembly Stage #1
Attach Front and Rear Stabilizer Tubes to Main Unit
Assembly hardware required:
(4) Flat Head Screw 8x16L (item #11)
1.
Attach the FRONT STABILIZER TUBE (#12) to the MAIN UNIT (#14) by
inserting the two FLAT HEAD SCREWS (#11) into the holes in the stabilizer and
front of the main unit. Make sure that the wheels on the front stabilizer tube are
facing away from the main unit. Tighten bolts securely
2.
Attach the REAR STABILIZER TUBE (#15) to the MAIN UNIT (#14) by
inserting the two FLAT HEAD SCREWS (#11) into the holes in the stabilizer and
rear of the main unit. Make sure that the leveler adjustments on the rear stabilizer
tube are facing up. Tighten bolts securely.
