Page 14
7.
Walk the belt off of the crank arm.
8.
Use an 8mm allen key to remove the crank bolt
9.
Thread a crank puller tool with the
smaller 11mm
tip into
the crank arm, then use the tool to pull the crank arm off
the bottom bracket.
10.
Use a torque wrench coupled with an 8mm allen socket to
reinstall the crank bolt and torque to the value below:
40-44 ft-lb / 55-60 Nm
11.
Walk the belt back onto the crank pulley, lift up the idler
arm, then slip the belt back underneath the idler pulley.
