SCI A2840/R, Owner'S Manual

13

The unit can be operated using either the wireless remote or the front control panel.

1.  Press the 

POWER

button. This starts the unit and turns on the LED display. The soft blue  

backlight will turn off after approximately 20 seconds.

2.  Press the 

MODE

button successively to select your desired mode; 

MANUAL, AUTO, 2 

HOURS, 4 HOURS

(see Advanced Functions).

Note: Ozone setting will operate for 2   

hours and then revert to ANION.

3.  Press the 

FUNCTION

button successively to select 

ANION

or 

OZONE

. If the unit is set to 

OZONE

, it will convert automatically to 

ANION

after 2 hours. However, if set to 

AUTO

mode; 

the Ozone will operate for 20 minutes, turn off for 40 minutes, and then continue to repeat the 

same cycle until you stop the 

AUTO

mode.

4.  Press the 

UV/Ti02

button to power the UV Bulb sterilizer 

ON

and 

OFF

. We recommend you 

leave this feature turned on. 

Note: Do not look directly at the UV Bulb while it is operating.

5.  Press the 

FAN

button successively to adjust the fan speed between low, medium and high.

Mode

Function

Infrared
Receiver

Power Switch

Fan Speed

UV/TIO

2

LCD
Screen

GENERAL OPERATION

FUNCTION OVERVIEW

Front 
Panel

Fan
Exhaust

Pre-filter
Panel

I-4506 BR7580R-1  6/25/07  7:57 AM  Page 13