Bravo G4 17 / Bravo G4 22 / Bravo G4 28
EN
51
12.1. USB MANAGEMENT
Before carrying out the following operations insert the USB key.
It is possible to copy data about the cycles carried out, stored in the internal memory of the steriliser, on a USB key.
To download the files of sterilisation cycles/tests select the following
button:
The USB key must be formatted according to the instructions set
forth in: appendix - technical characteristics, summary table.
If the USB key is not present, its insertion is required.
Before proceeding with the download you are required to select the report
type and to choose the format between:
•
Report (standard version);
•
Extended report.
The sterilisation / test cycle report files are in PDF format.
It is possible to select the number of cycles to download on the external
storage device:
•
New;
•
Last 10;
•
Last 50;
•
Last 100;
•
Custom Mode.
If Custom Mode option is selected, you will be prompted to enter the
number of the first and last cycle of the interval to download.
At the end of the download it is possible to remove the key.
When a preset number of cycles is exceeded, the system
generates a warning about the need to carry out a backup of data
contained in the internal memory.
To delete the warning display, download the cycle reports using
the New option.
Do not turn on the steriliser if USB key is inserted.
The unit scans for new software updates anytime a USB is
inserted and the machine is turned on. Only insert the USB
stick when you need to download cycles and when
performing software updates (for SERVICE only).
