Bravo G4 17 / Bravo G4 22 / Bravo G4 28
54
EN
Choose NET CONFIGURATION to configure the network.
DHCP can be set as automatic or manual.
In automatic mode the network configuration parameters are assigned
automatically, in manual mode the network configuration parameters
must be set manually.
12.3. PRINTERS
To set parameters select the following item:
Select PRINTERS to choose the support / mode to be used between:
•
NO PRINTER - deactivates the printer.
•
REPORT - allows printing a compact version of the cycle summary
report at the end of the process.
•
EXTENDED REPORT - allows printing an extended version of the cycle
summary report at the end of the process.
•
BARCODE LABELS - allows printing the labels bearing the cycle data
and the barcode.
At the end of the cycle, press DOOR OPENING,
If the LABELS mode is selected, the following screen is displayed, from
which it is possible to set the number of labels and the interval, in days,
between the cycle execution date and the sterilised material expiry date.
Use the arrows to adjust the value.
Press the PRINTER button to print the labels complete with barcode.
In case of unsuccessful or test cycle, only one label will be automatically
printed.
If the printer is connected to the autoclave and REPORT option is set, the
steriliser automatically prints the summary report at the end of the cycle.
