Bravo G4 17 / Bravo G4 22 / Bravo G4 28
EN
49
11. USED WATER DRAIN
When the water maximum level is reached, a specific message is displayed.
Open the door and continue as follows:
1
Prepare a basin with a capacity of at least 4 litres in proximity to the
steriliser; place the free end of the drain tube provided in the basin;
2
Insert the other end of the tube in the female union beneath the
chamber inlet (connector on the left) pushing down until you hear a
click;
3
Completely empty out the tank and then press on the upper part of the
union and detach the tube quick coupling.
Do not open the tank doors during the cycle execution in
order to prevent hot water leaks or spurts.
Detaching the tube
