Page 7
Setting up and using your STAT
IM
G4 web portal
Ethernet
Port
5000 G4
2000 G4
This web portal is a direct connection to the STAT
im
on your network. It is protected by
your firewall and not accessible to outside users. It provides real-time cycle information
and archived sterilization records unique to this unit. From here, you can print reports,
set up email notification and search cycle histories. To set up your web portal follow
these instructions.
Connecting to a Network
the StAt
im
G4 has a 10/100Base-T Ethernet port located at the back of the unit.
To connect your STAT
im
to a network using a router, follow these steps:
1.
Connect your network cable to the Ethernet port at the back of the unit (see next
section for location of port). If your office uses a router, the router should automatically
assign the unit an IP address. You will know the IP address has been assigned when
the red X over the Network icon disappears.
NOTE:
In some circumstances, for example, where you do not have a router and when
using Windows Network Sharing, you may have to assign a dedicated or ‘static’
IP address. To assign a static IP address, contact your local network administrator.
