Page 9
Setting up and using your STAT
IM
G4 web portal
Reserving an IP Address for Your STATIM
When your
StAt
im
is connected to a router on your network, it is assigned a unique
IP address.
NOTE:
Accessing this screen will vary for each router, please consult your
router’s User Manual or contact your network administrator for more detailed
instructions. SciCan currently recommends D-Link DIR-615 Wireless N router.
If the connection between your
StAt
im
and the router is lost (ie. facility lost power,
StAt
im
or router was restarted, etc), then the re-established connection may be
a different IP address. This may result in invalid links from any previously saved
bookmarks or other saved connections. In order to set a ‘permanent’ IP address,
follow these steps to establish a ‘DHCP/IP/Address Reservation’:
NOTE:
Each manufacturer may use different nomenclature, this settings may be
called one of the following:
•
DHCP Reservation,
•
IP Reservation, or
•
Address Reservation.
IMPORTANT:
Please contact your network administrator for more detailed
instructions.
1.
on the
StAt
im
unit LCD, select the network information button and write down
the numbers found for the GATE (Router Local IP).
2.
Use this GATE address in any web browser to access your router settings.
NOTE:
You will need your network password to change the settings.
3.
Use the ‘DHCP/IP/Address Reservation’ function to assign a ‘permanent’ IP
address to your
StAt
im
. You will have to select the appropriate device to apply
this setting, your unit’s default name will be: ‘statim_###’
MAC: xx:xx:xx:xx:xx:xx
DHCP
Link: On
Bind: dhcp
IP: xxx.xxx.xxx.xxx
MASK: xxx.xxx.xxx.xxx
GATE: xxx.xxx.xxx.xxx
DNS1: xxx.xxx.xxx.xxx
mm/dd/yyyy hh:mm:ss
SELECT A CYCLE
