24
Setting Up
Setting Up
Setting Up
Setting Up
Setting Up Ad
Ad
Ad
Ad
Advvvvvanced F
anced F
anced F
anced F
anced Fea
ea
ea
ea
eatur
tur
tur
tur
tures f
es f
es f
es f
es for the
or the
or the
or the
or the
R
R
R
R
Remote
emote
emote
emote
emote
Setting Up Volume Control
You can program your Volume and Mute
keys to function in one of two ways:
•
To control the volume on a single device
all the time
•
To control the volume on each device,
depending on the mode key that you
press
Note:
The default setting is to control
volume through your TV all the time.
Follow these steps to change the way your
Volume and Mute keys function.
1. Turn on the appropriate device.
2. Press
SETTINGS
to access the
General Settings on-screen menu, and
verify that the Audio: Volume Control
setting is set to “Variable.”
3. Press
SELECT
and the appropriate
mode key (AUX, VCR, TV, or CBL) at
the same time until the light blinks
twice.
4. Using the keypad on the remote, press
9 9 3
. The light blinks twice.
5. Do you want the Volume and Mute
keys to operate a single device all the
time?
• If
yes
, press the mode key for the
device that you want to control the
volume.
• If
no
, press
VOL -
to control the
volume through various devices
based on the mode key.
6. Point the remote
toward
the device and
confirm that Volume and Mute function
as expected.
You can program the TV, VCR, and AUX
mode keys on your remote to control other
devices. For example, you can program the
AUX mode key to control a second VCR
device, such as a DVD player.
1. Turn on the device.
2. Press
SELECT
and
CBL
at the same
time until the light blinks twice.
3. Using the remote control keypad, press
9 9 2
. The mode keys blink twice.
Reassigning Mode Keys
4. Press the mode key that identifies the
kind of the device you want to control,
and then press the mode key that you
want to change. For example, to
program the AUX key to operate a
television, press VCR and then AUX.
If you want to reassign a key to its original
mode, you must repeat this procedure.
Instead of pressing two keys in step 4,
press the key that you want to reassign
twice:
•
to identify the kind of device you want
to control
•
to identify the mode key that you want
to change
This section lists advanced features that
you may or may not choose to set up.
None of these features are required. If you
just want to watch TV, go to
Using the
Explorer 3170HD Set-Top
, later in this
guide.
