Scientific Atlanta AT8560 AllTouch, User Manual

16

Put It Back the Way I Got It 

Return speci

Þ

 c advanced functions or all advanced functions back to their original 

settings. Choose the procedure that 

Þ

 ts your needs

.

Important

: Your service provider may have programmed the dual power control feature 

for your convenience. Therefore, if you reset the power control, you may need 
to program the remote to control the power for the set-top and TV at the same time.

Resetting Mode Keys (Program Code 9 9 2)

You can reprogram the VCR key and the AUX key to operate in their original modes.
1.  Press and hold

 CBL

 and

 SELECT

 until all mode keys blink twice.

2. Press 

9

9

2

. The CBL key blinks twice.

3.  Do one of the following: 
  •  If you are returning the VCR key to its original state, press

 VCR

 twice.

  •  If you are returning the AUX key to its original state, press

 AUX

 twice.

 Result

: All mode keys blink three times.

4.  Repeat this procedure if you want to return both keys to their original modes. 

Resetting Device Codes and Mode Keys (Program Code 9 7 7)

Follow this procedure to return programmed device codes and mode keys to their original 
settings. This procedure erases device codes you programmed. In addition, this procedure 
returns all reassigned mode keys to their original operation. 
This reset procedure does not reset any changes you made to power, volume, or channel 
control. 
1.  Press and hold

 SELECT

 and

 CBL

 until all mode keys blink twice.

2. Press 

9

7 7

. All mode keys blink three times. Then, after a few seconds the CBL key 

blinks twice. 

Resetting Power, Volume, and Channel Control (Program Code 9 8 0)

Follow this procedure to return power, volume, and channel control to their original 
settings. This reset procedure does not reset any device codes you programmed or affect 
mode key reassignments.    
1.  Press and hold

 SELECT

 and

 CBL

 until all mode keys blink twice.

2. Press 

9

8

0

. All mode keys blink three times.

Resetting All Changes (Program Code 9 8 1)

Follow this procedure to return the remote completely back to its original settings. 
1.  Press and hold

 SELECT

 and

 CBL

 until all mode keys blink twice.

2. Press 

9

8

1

. All mode keys blink three times. Then, after a few seconds the CBL key 

blinks twice.