background image

 

Changing SNMP Settings 

4018055 Rev B 

39

Changing SNMP Settings 

Introduction 

The SNMP Trap Destinations table on the SNMP page represents to which 
destinations IP address the traps are sent. Traps can be logged into the ROSA system 
as messages. More information concerning ROSA can be found in the ROSA User’s 
Guide. 

 

To Change SNMP Settings 

The following explains how to complete a destination entry. 
1

 

On the XDQA24 configuration site, click the SNMP link. 
Result: The SNMP page is displayed. 

 

2

 

Enter the following parameters in the trap destination entry: 

-

 

Index: an object that uniquely identifies a trap destination entry 

-

 

IP Address: the IP address of the trap destination 

-

 

Community String: this parameter can be used to provide authentication, 
privacy and authorization services. 

Note: When the trap destination is a Copernicus™ element manager (EM) with 
the ROSA Network Management System (NMS), the IP address of the Copernicus 
has to be entered. 

 

 

Summary of Contents for Continuum DVP eXtra Dense QAM Array 24









































































































Reviews: