How to Connect,
Continued
Back Panel Connections
The following table describes the back panel connections and functions.
Item
Description
Ethernet Port
To connect two EXPLORER 2000 units together for use
with the Tape ‘N View
™
feature. See Installing Tape ‘N
View
™
for more information
USB (Universal To connect external equipment
Serial Bus) Port
Data Port
To connect the VCR Commander
™
module or similar equipment.
See the VCR Commander
™
User’s Guide for more information
S-Video
To connect a camcorder, a VCR with S-Video, or a TV
Output
with S-Video. You use this connection, also connect the
L/R audio output on the EXPLORER 2000 to the same
connections on your TV, VCR, or stereo
Video Output
To connect the video channel to a TV or VCR. You use
this connection, also connect the L/R audio output on the
EXPLORER 2000 to the same connections on your TV,
VCR, or stereo
Stereo Audio
To connect left and right audio channels to a stereo receiver
Output
or a TV with stereo sound. Required connections if you
connect the video output (see the previous item) to your
TV, VCR, or stereo receiver
Cable Output
To connect the cable to a TV or a VCR
Cable Input
To connect the cable signal from the cable company to
the EXPLORER 2000
RF Bypass
To bypass the EXPLORER 2000 and watch regular
Option
cable TV
AC Power
To connect the EXPLORER 2000 power cord to an
Input
electrical outlet
AC Switched
To connect power to another device, typically your TV
Outlet
Continued on next page
565069 Rev B
EXPLORER 2000 User’s Guide
1 8
Summary of Contents for EXPLORER 2000
Page 1: ...EXPLORER 2000 DigitalHomeCommunicationsTerminal User s Guide...
Page 42: ......
