3
• The instrument can only be disconnected from the main
power supply by pulling out the main or the connector plug.
• The voltage stated on the label must correspond to the
main power supply.
• Ensure that the main power supply cable does not touch
the hotplate. Do not cover the device.
• The instrument may only be opened by e
xperts.
• Keep away from high magnetic field.
2. Proper Use
The instrument is designed for mixing and/or heating
liquids in schools, laboratories or factories.
•
Observe the minimum distances between the devices,
between the device and the wall and above the assembly
(min. 100 mm)
>100mm
Figure 1
This device is not suitable for using in residential areas or
other constraints mentioned in Chapter 1.
