6
2. Local IR remote control.
You can control the HDMI route of the matrix by using the IR remote.
There are four group key pads for two output ports. For each output port source
selection, there are 4 number keys and two arrow keys. Press number keys to
select specific input port. Left arrow button to backward the input port, and right
arrow to forward input port.
3. IR extender control.
Use the IR receiver cable to change the IR receiver position.
If controlling the HDMI Matrix through the 1/8” (3.5 mm) input jack on the rear
panel, connect the IR cable directly to the matrix rear IR receiver extension
sockets.
