8
11
：
4K60Hz(Y420)_3D_ audio5.1
12
：
4K60Hz(Y420)_3D_ audio71
USER EDID 1
USER EDID 2
USER EDID 3
EDID from output1
EDID from output2
EDID from output3
EDID from output4
5. IP control module information shown on LCD panel.
Pressing In3 and In4 simultaneously for 3 seconds, IP setting information will
be shown on front LCD panel.
Other IP setting information will be shown automatically after every 3 seconds.
6. Turn on or turn off DHCP mode.
Pressing In1 and In3 simultaneously for 3 seconds to toggle the DHCP mode.
or
7. Turn on or turn off cascading mode.
When cascading is enabled, the matrix will not read EDID data from sink
device (TV) or hot plug status, it will always output the signal to the sink device
without doing any handshake. This is only when a handshake problem
happens.
When this happens, try this mode to solve the problem.
Press In1 and In2 simultaneously for 3 seconds to toggle on/off the
cascading mode.
