background image

Page 14

19. Maintenance

Clean this unit with a soft, dry cloth. Never use alcohol, pint thinner of benzene to clean these devices.

Servicing

Damage requiring service: This product should be serviced by a qualified service engineer if:

The DC power cord or AC adaptor has been damaged.

Objects or liquids have entered the housings.

The product has been exposed to rain.

The product has stopped working or shows signs of significant change in operating performance or function.

The unit has been dropped or severely damaged externally.

Servicing personnel: Do not attempt to service the product beyond that described in these instructions. Refer all
other servicing to authorised serving personnel.

Replacement parts: When parts need replacing ensure the service engineer uses parts specified by the manufacture
or parts that have the same characteristics as the original parts. Unauthorised substitutes may result in fire, electric
shock or other hazards.

Safety check: After a repair or service, ask the engineer to perform safety checks to confirm the product is in
proper working condition.

Warranty

If your product does not work properly because of a defect in materials or workmanship, our Company (referred to
as "the warrantor" ) will , for the length of the period indicated as below, (Parts and labour 2 years) which starts
with the date of original purchase ("Limited Warranty period"), at its option either (a) repair your product with new
or refurbished parts, or (b) replace it with a new of a refurbished product. The decision to repair or replace will be
made by the warrantor.

During the "Labour" Limited Warranty period there will be no charge for labour. During the "Parts" warranty
period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited
Warranty is extended only to the original purchaser and only covers product purchased as new. A purchase receipt
or other proof of original purchase date is required for Limited Warranty service.

Returning a Product

When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original carton.
Include a letter detailing the complaint and provide a day time phone number and/or email address where you can
be reached.

User Manual

Scion Tech

SC04.MX88

Tel: +44 (0) 1635 862484

www.scion-tech.co.uk

sales@scion-tech.co.uk

Summary of Contents for SC04.MX88

















Reviews: