SCM Superset 23 Manual Download

Page: 14 / 145

GENERAL INFORMATION

1.12

SUPERSET 23/23E/PLUS

ad-gb1.pm5

– PRESET mod. 25 for measuring tool diameter

– reading is through tool contact on electronic digital indicator;
– centesimal precision;
– maximum measurable diameter ............................................................................... 250 mm.

– Shaver on first spindle dia. 165 mm
– Supplementary shaver dia. 150 mm
– Supplementary shaver dia. 165 mm
– 2 blade heads dia. 140x240x40 mm in light alloy for horizontal spindles (8500 RPM)
– 2 blade heads dia. 140x235x40 mm in light alloy and interchangeable reversible blades with centrifugal

chucking for horizontal spindles max. 6000 RPM

– 2 blade heads dia, 140x130x40 mm in light alloy for vertical spindles max. 8500 RPM
– 2 blade heads dia. 140x125x40 mm in light alloy and interchangeable reversible blades with centrifugal

chucking for vertical spindles max. 6000 RPM

– 2 blade heads dia. 140x250x40 mm in light alloy for horizontal spindles (for maximum working width 240

mm) (8500 RPM)

SUPERSET 23 PLUS OPTIONALS

INCREASED POWER FOR:
– 1st lower horizontal (planer) .............................................................................................. 7,5 - 10 - 15 HP
– right/left vertical ................................................................................................................. 7,5 - 10 - 15 HP
– 2nd lower horizontal .......................................................................................................... 7,5 - 10 - 15 HP
– 2nd upper horizontal .......................................................................................................... 7,5 - 10 - 15 HP

INCREASED POWER FOR:
1st upper horizontal spindle ............................................................................................................ 10 - 15 HP

INCREASED POWER FOR:
piece feed

....................................................................................................................................... 7,5 HP

– 220 Volt model
– Automatic star-delta start for motors with 5.5 HP rating
– Feed assembly before surfacer with pneumatic pressure
– Second feed assembly after universal with pneumatic pressure
– Feed assembly after upper horizontal complete with tandem feed assembly after second right vertical with

quick cutout for drive centre distance of 435 mm with pneumatic pressure and mechanical cutout system
(layout 13-14)

– Feed assembly after 2nd upper horizontal for drive centre distance of 435 mm with pneumatic pressure and

mechanical cutout system (layout 15 and 16)

– Feed assembly after 2nd upper horizontal complete with tandem feed assembly before the upper horizontal

unit with quick cutout for drive centre distance of 435 mm with pneumatic pressure and mechanical cutout
system (layout 17 and 18)

– Tandem feed assembly in infeed before the surfacer with pneumatic pressure and quick cutout
– Tandem feed assembly before right vertical unit with pneumatic pressure and quick cutout (layout 15 and 16)
– Tandem feed assembly before right vertical unit with pneumatic pressure and quick cutout (layout 13-14-17-

18)

– Tandem feed assembly between the two horizontal/upper spindles with pneumatic pressure and quick cutout

(layout 15-16-17-18)

– Tandem feed assembly before universal with pneumatic pressure and quick cutout.
– 2 motorized lower drive rollers on worktable (layout 13-15)