background image

Page 

3

 of 

21

 

 

Welcome 

We are excited to welcome you to the sComm family of UbiDuo users! Whether you have recently purchased 
a UbiDuo 3 Wireless, UbiDuo 3 Wired, UbiDuo Text to Speech 1 (TTS1) or a UbiDuo 3 Text to Speech 2 (TTS2), 
we hope you find this User Manual helpful in making changes to maximize the use of your UbiDuo 3 and 
make it easy for those who are deaf, hard of hearing or hearing to use.  

FCC 

If trouble is experienced with this equipment, for repair or warranty information, please contact sComm toll free at 
866-505-7008 (voice), or 816-527-9079 (video phone.) 

There are no user serviceable components within this equipment. 

Compliance Statement (Part 15.19) 

This device complies with Part 15 of the FCC Rules. 

Operation is subject to the following two conditions: 

1.

 

This device may not cause harmful interference, and 

2.

 

This device must accept any interference received, including interference that may cause undesired 
operation. 

 

Warning (Part 15.21) 

Changes or modifications not expressly approved by the party responsibl

e for compliance could void the user’s 

authority to operate the equipment. 

FCC Interference Statement (Part 154.105 

(b)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference in a 
residential installation.  This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by trying one of the following measures: 

-

 

Reorient or relocate the receiving antenna 

-

 

Increase the separation between the equipment and the receiver 

-

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected. 

 

T

his portable transmitter with its antenna complies with FCC’s RF exposure limits for general 

population/uncontrolled exposure. 

Specific Absorption Rate (SAR) 

This portable equipment with its antenna complied with FCC’s RF radiation exposure limits set forth for an 
uncontrolled environment. This equipment has shown compliance with FCC’s Specific Absorption Rate (SAR) limits. 

To maintain compliance, this transmitter must not be co-located or operating in conjunction with any other 
antenna or transmitter. 

Summary of Contents for TTS1























Reviews: