Securing the Canopy frame
1.
Tighten the quick release clamps on the arm
supports.
Ensure the Canopy is as close to the seat as
possible.
Apply pressure both from behind the Canopy
frame and to the front of the armrest. Then
lock the quick release clamps on the arm
support into position. Repeat the process on
the other arm support.
2.
Using a
4mm allen key
, on both sides of the
Canopy frame, tighten the brackets that hold the
arm supports in place.
TOP TIP
Before continuing please ensure the Canopy is vertical
when viewed from behind. If necessary, adjust the arms by
loosening the allen bolts and sliding up or down.
22
Summary of Contents for Canopy
