Scooty CITY GRAN, Original Instruction

11

EN

• 

To change the unit’s mode: briefly press the ON/OFF button (6). There are 2 

different modes: economy and motion. When the “S” is displayed, this means 
that the motion mode is activated.

3.2.  UNPACKING AND ASSEMBLING THE DEVICE

To unpack the product, it is recommended to have a clear surface that is 
large enough to unpack and prepare the device. Take the device out of its 
packaging, making sure to not injure yourself or damage other products or 
your surroundings. Have someone help you if the product is too heavy for you 
to handle on your own (the weight of the device is indicated on the packaging).
Before using the product, the handles must be assembled. To do this, unfold 
the device (see following sections) and install the brake lever and the handles 
as per the following instructions: 
An adult must unpack and assemble the device.

1.

 Use the markings on the handles to help you. 

R

 marks the right-hand handle 

and 

L

 marks the left-hand handle.

2.

 Screw on each handle in alignment with the handlebar axis. Do not tighten 

or apply force if the handle is crooked. It should be possible to tighten the 
handle without applying force.

3.

 Ensure you have properly tightened the handle once it reaches the stop.

3.3.  FOLDING/UNFOLDING THE DEVICE

The device can be folded and unfolded easily thanks to the release lever 

(9) 

and the folding/unfolding safety latch

 (15)

. You should always perform this 

operation with care in order to avoid getting pinched or jammed.

Unfolding

1.  Place the scooter horizontally in front of you.
2.  Unlock the scooter by pressing the lever (11).
3.  Lift the scooter up approximately 90° until you hear a slight click.
4.  This completes the operation.

Folding

1.  Place the scooter horizontally in front of you.
2.  Unlock the scooter by pressing the lever (11).
3.  Lower the frame of the scooter by 90°. 
4.  This completes the operation.