11
EN
push the safety catch
(13).
5.
If the device is equipped with fold-away handles, set them up by pulling
them apart. If not, the handles are already set up in the correct position.
6.
The process is complete.
Folding
1.
Place the device in front of you in a horizontal position.
2.
If the device is equipped with folding handles, fold them away to the sides
if needed.
3.
Pull and turn the safety catch
(13)
.
4.
Unlock the device by lowering the lever
(12)
.
5.
Lower the scooter frame by 90 degrees until you hear a soft click.
6.
Push the safety catch
(13).
7.
The process is complete.
The device is equipped with a double safety system:
1.
Locked position. The device cannot be folded. Pull the catch to unlock.
2.
Unlocked position. The device can be folded away. Pull and turn the safety
catch in order to fold the device away. Push the safety catch to lock it.
3.4. CHARGING AND BATTERY INDICATOR
Charge the battery before first use. To do so, charge the device using the
charger supplied.
Important:
Only charge the device with the original charger supplied with
the device by the manufacturer. In case of doubt, loss or malfunction, avoid
charging the device with another charger. It is advised you obtain a new
charger from your dealer. You will find the email address to contact customer
support on the last page of the warranty manual.
Notice:
We recommend you fully recharge the battery after each use and at
least once a month.
WARNING: The device must be unfolded and on its stand for charging to avoid
damaging the charging plug.
1.
Lift the charging port cover and make sure there is no water or any other
liquid inside the charging connector, and that there are not any objects in
it that could cause a short circuit or prevent the plug from being plugged
in properly and safely. Next, connect the end of the charging cable to the
charging port
(9).
BEFORE
connecting the other end to the power supply.
Ensure you always connect the charger to the device properly first,
BEFORE
Summary of Contents for eKicker
Page 2: ......
