SCOPE COMMUNICATIONS UK LTD
PAGETEK PRO MK2
Ref: PTPROMK2INSTALLred
Page
6
of 27
Issue 1
3) Installation
The information contained in this Section is intended for use by authorised system
installation engineers only. Installation must only take place after a full site survey
has been performed and signed off by both the installer and the purchaser.
3.1 Siting of the unit
a) The Pagetek Pro MK2 cabinet must be permanently fixed to a wall (using the supplied
screw kit and washers) within 1 metre of the host Fire Alarm panel and within 1 metre of a
double poll isolated mains supply*.
[*in accordance with BS 5839-1: 2013, Section 25.2]
b) Take care to ensure that there is a minimum clearance of 20 cm on all sides, plus
additional 50 cm above the unit if fitted with the 3/4UHF antenna. Do not fit the battery and
antenna until the cabinet has been fixed to the wall.
c) For ease of installation, a drilling template is provided with the system. DO NOT try to
use the cabinet as a template as this will almost certainly damage the precision crystal
components and will contaminate the electronic circuit boards within the housing.
d) Fix the cabinet to the wall using the screw kit and drilling template provided, ensuring
that the steel/rubber washer sets are correctly fitted to each mounting point, as shown in
diagram 1.
SYSTEM TEST
SOUN DER MUTE
RESET
ON