16
White light flashes every 3 seconds
to indicate programming mode.
Red light flashes to indicate
accelerometer sensitivity setting.
Turn Ignition on/off to toggle through
sensitivity levels. (1-5). Test shock with
ignition off. Red LED will light for 1.5
seconds to indicate successful shock.
Wait 1 second to test again.
Prog. Mode
Accel. Mode
Programming mode ends after 2 minutes
of inactivity. Exit any time by turning
ignition on for 3 seconds.
1.5 sec
Summary of Contents for RIDE CORE
Page 1: ...1 core powered by ...
Page 5: ...7 Components Core Quick Connector GPS Antenna Hook Loop Cable ties Harness ...
Page 17: ...19 ...
Page 18: ...20 ...