Page 7
5. INSTRUCTIONS FOR USE
5.1 PROPER AND IMPROPER USE
This is an automatic cut-off machine, especially designed for cutting aluminum profiles. The use of the
machine for cutting other materials is hereby prohibited. Such use may cause damage to the machine and
put the health and safety of the worker at risk.
DANGER! We are not responsible for any possible accident caused by the failure to comply with the
aforementioned.
5.2 FUNCTION OF THE OPERATING MECHANISMS
1.
Blue push button: To re-arm machine.
2.
Operating mode selector: MANUAL - AUTOMATIC.
3.
Green push button: Automatic cycle start.
4.
Black push button: Hold down feeder clamp operation.
5.
Black push button: Hold down machine clamp operation.
6.
Lift protective shield.
7.
Blade raise advance regulator.
8.
Green push button: Blade raise.
9.
Emergency button with interlock. It stops the machine completely.
10. Red push button: Automatic cycle stop.
11. Saw blade on-off: ON, green colored symbol I; OFF, red O.
12. Touch screen 5, 6".
Summary of Contents for GAA-500-90 CNC DT20
