Page 9
5.3 MANUAL MODE
With the operating mode switch in the MANUAL MODE, the operator can activate the hold down
clamps, the feeder gripper and the saw blade. We recommend that very high feed rate for the saw
blade or high feed rate on the shuttle feed not be used as this would greatly reduce the duration of
the blade and the quality of the cut. The feeder can also be operated for maintenance purposes in
this mode.
5.4 AUTO MODE
In the auto mode, you can program the part list and the programs of work. To program the part list,
use the following steps:
With the arrows
1 and 2, we can
select the
number of parts
to program. It
is possible to
program the
total length
and six
drilling
positions.
Summary of Contents for GAA-500-90 CNC DT20
