Page 10
3.2 MACHINE MOVING PROCEDURES
WHEN USING A PALLET JACK, ADHERE TO THE FOLLOWING PRECAUTIONS:
•
Place the table in its lowest position.
•
Remove the hydraulic unit. (See Sect. 3.7 and 3.8)
•
Fix the cylinder in the middle of the press.
•
DO NOT USE A NARROW PALLET JACK
•
For stability, Pallet Jack must be wide enough to just fit between rectangle tubes.
•
See FIGURE 2 on the next page.
The PRESSPRO 110 weighs 3000 lbs. Make sure the pallet jack you use has enough capacity to safely
lift the weight the press and follow the instructions below.
3.3 PALLET JACK
CAUTION: Use extreme caution when moving press as it is TOP HEAVY. When moving the press
with a pallet jack, it must be on a smooth level surface! Have more than one person
help you. Watch the press at all times. Go slowly with smooth movements. Unexpected
movements can make the press tip over and possibly cause serious injury or death.
The most common method of moving the PressPro 110 is with a pallet jack or a fork lift. The following
section shows the correct way to safely move the press without damage or injury.
