PAGE 7
Note: do not use the machine in the following conditions:
· explosion hazard zones;
· outdoors;
· extreme temper5°C < > +50°C
Note: maximum pressing force can be exerted for a short time only.
Caution: any welding operations on the press table are prohibited. This can
damage the machine or the operator can get dangerously injured.
2.3 Out of use
Do not use the machine when:
· The operator has not read or not understood the manual.
· Maintenance has not been done by qualified personnel.
· The press is not complete or non-original spare parts have been used.
· Any worn parts are visible.
· The specifications of the power supply are not conform the information stated at the motor plate +/-10%.
· The power supply plug is not equipped with a protection circuit.
· Unprotected bystanders are present.
Note: the machine MUST be bolted to the floor - see Chapter 3 Installation .
Never use a machine unless it's bolted to the floor. It can tip over if heavy
parts are loaded on the table. This can cause severe injury or death!! Use
the press in the vertical position ONLY .
www.scotchman.com
Summary of Contents for PRESSPRO 176MT
Page 20: ...PAGE 20...
