Page 12
8.0 RECOMMENDATIONS & MAINTENANCE
8.1 TYPE & FREQUENCY OF REVIEWS
9.0 GENERAL RULES & SAFETY CHECKS
Before using the machine, check the effectiveness and perfect operation of the safety devices. Check
that the moving parts of the machine are not blocked, that there are no damaged parts and that all
of the machine components are positioned correctly and that they work properly.
Verify that the motor-guard switch works correctly by testing it during a no-load cycle of the
machine.
It is absolutely prohibited to altar any safety device.
It is absolutely prohibited to work without the guards in place.
It is mandatory to use gloves when changing the saw blade.
It is mandatory to use officially approved work clothing, which must be fastened.
Before starting work, the operator must be sure to remove all tools and wrenches that have been
used for any maintenance or adjustments.
In the event of fire, use powder extinguishers and disconnect the machine from the electric system.
LUBRICATION POINTS
TYPE OF GREASE/OIL
FREQUENCY
Arc turning bolt Fig. 10.2
Bearing grease
Yearly
Long blade-guide bracket Fig. 10.3
SAE 30
Weekly
Bearings no. 26, 46 Fig. 10.3
Bearing grease
Weekly
CHECK
MATERIALS TO USE
FREQUENCY
Saw blade tension
100 BARS
Daily
Level of coolant liquid
Top up with WHITE COOLANT
Daily
Cleanliness of machine
Diluted mild degreasing fluid
Weekly
Cleanliness of coolant tank
Damp cloth, brush
Monthly
Condition of nylon shaving guard
Fig 10.4
Replace, if necessary
Monthly
Saw blade guides
Sections 7.1 & 7.2
Monthly
Summary of Contents for SU-280
