Page 8
5.4 CUTTING COOLANT
When filling the cutting coolant, use pure, synthetic water-soluble coolant and pour it in through the
coolant down-tube on the machine mount.
CAUTION: When it is necessary to empty the liquid coolant tank, do not improperly dispose of the
coolant.
ATTENTION: The use of any other kinds of coolants may cause irreparable damage to the machine,
as well as diminish the quality of the cut and reduce the life of the saw.
6.0 INSTRUCTIONS FOR USE
6.1 PROPER AND IMPROPER USE
Band saw machine for cutting all kinds of ferrous and non-ferrous materials. Use of the machine for
cutting other materials is prohibited. Such use may cause damage to the machine and risk the safety
of the worker.
DANGER: We are hereby not liable for any possible accident caused by the failure to comply with
the aforementioned provision.
6.2 FUNCTION OF THE OPERATING MECHANISMS
1.
The vise is closed using lever no. 1. Work with the vise jaws less than ¼ inch (6 mm) from the
material to be secured.
2.
Angle locking lever. Set to position C to allow angled rotation.
Summary of Contents for SU-280
