1. Instruction Features
1. Adopt liner slide which make X
、
Y
、
Z axis all can do micro adjust or rapid
positioning with high precisely.
2. Heating system controlled by touch screen, and optical alignment are easy
operation to ensure positioning precision.
3. Have connected computer device, achievable computer control,
convenience for setting, display, save, and printing curve.
4. The excellent temperature control system ensures the effectiveness of
welding.
1) There are independent heating areas from top to bottom. The first and
second temperature areas can control many groups & sections of
temperature parameters at the same time. The third area preheats the
PCB thoroughly to achieve the best welding effect. Temperature, time,
slope, cooling and alarming all display on the touch screen.
2) Use a V-groove equipped with a flexible fixture for PCB positioning to
protect the PCB.
3) Use a powerful cross-flow fan to cool PCB rapidly to prevent it from
deformation and ensure the welding effect.
4) When the temperature goes out of control, the electric circuit can cut off
automatically, with over-heating protection.
2. Installation
1. Be away from flammable, explosive, corrosive gas or liquid.
2. Avoid damp places, the air humidity is less than 90%.
3. Temperature -10
~ 40
, avoid direct sunlight, prolonged sun exposure.
℃
℃
4. No dust, fibers and metal particles floating in the operational environment.
5. The place of installation needs to be flat, solid, no vibration.
6. Place heavy objects on the body are strictly prohibited.
7. Avoid the affection of direct airflow, such as air-conditioners, heaters or fans.
8. The back of rework station should be reserved 30CM for heat dissipation.
9. The placing table (900x900mm) be flat, the relative level of a height
750~850mm.
10. Distribute wiring must be handled by a qualified professional technician,
