Page 35
Page 35
NOTE: RINSING mode consists of:
a) energize the water drain valve and the
water pump for 40 seconds to empty the
reservoir
b) deenergize the water drain valve and the
water pump for 1 minute
c) energize the water inlet valve till the fill up
of the water sump
d) energize the water pump for 1,5 minutes.
The above sequence is repeted 7 times so to
be sure to have removed any possible trace
of Ice Machine Cleaner.
6.
At the end of the 7th Rinsing cycle the P.C.
Board stops the operation of the machine with
the blinking (slow) of the Yellow LED.
7.
Pushing the RESET BUTTON for 6-8
seconds the machine restarts in the freezing
cycle.
8.
Replace the evaporator cover deflector and
front panel.
9.
Check the next batch of cubes to be sure all
the cleaner is gone (no sour taste).
CAUTION - DO NOT use ice cubes
produced from the cleaning solution. Be
sure none remains in the bin.
10. Pour hot water into the storage bin melt the
cubes, and to also clean the bin drain.
