8
ASSEMBLY INSTRUCTIONS
(CONT’D)
CORNER ASSEMBLY
(OPTIONAL)
Hardware Used
x 4
FF
7
screw
6
1. From behind the assembly, Attach L corner support
rod (I), secure with one washer (BB) and one bolt
(AA).
1
Hardware Used
long bolt
washer
x 1
x 1
AA
BB
I
AA
BB
K
DD
6. With the help of another person, position the insert
(K) into opening of mantel assembly.
Note: DO NOT
plug the insert (K) into power outlet
yet.
CAUTION: DO NOT
slide the insert on top of wood
to avoid scratching wood surface.
7. Secure the insert (K) to the base (J) with two
screws (FF) on the left side and on the right side
of the insert (K).
Assembly is now complete, with the help of
another person, move the assembly to the final
desired location. Once in final position you may
plug the insert (K) into the power outlet.
