ASSEMBLY INSTRUCTIONS
Using the dimension drawings on page 3, determine the
desired location for the mirror. Take into account you
should have a 3 inch minimum clearance between the
bottom of the mirror and the top of the faucet/vanity.
Use the main body (B) to mark the screw locations on
the wall.
Note:
Make sure it is level.
Note:
The installation location has to have power outlet
inside of main body (B) as shown
4.
Secure the main body (B) to the wall using screws (AA)
or the hardware best suited for your wall type. Refer to
Mounting Options on page 5. Be careful to not drill into
hidden electrical or plumbing lines inside the wall when
mounting main body (B) to wall.
5.
7
With the help of another adult, hold mirror (A) away
from the main body (B), connect the quick connect
wires (1), then plug the power cord into the wall outlet
(2). Secure power cord to avoid contact with sharp
objects.
6.
4
B
5
B
AA
AA
AA
AA
Hardware Used
Wall Mount Screw
Drywall Anchor
x 4
x 4
AA
BB
(CONT’D)
AA
BB
6
A
B
2
1
1
