5
3. Insert shelf pins (BB) at desired height, ensuring
they are level. Place shelves (C) on top of shelf
pins (BB).
2. Clean area where the cabinet (A) will be
permanently located prior to beginning
installation, ensuring the cabinet (A) will not
interfere with any plumbing or electrical lines
once mounted.
Locate wall studs and mark locations. With the
help of another adult, place completed cabinet
assembly to its final location. Adjust the height
of the cabinet (A) by twisting the adjustable
leveler foot pins on the bottom of each leg. Twist
clockwise to decrease height or twist counter-
clockwise to increase cabinet height.
Using hardware appropriate for your wall type
such as cabinet screw or toggle bolt (not
included), secure cabinet (A) to preferably two
wall studs anywhere through the cabinet
mounting bar. Be careful not to disturb any
electrical or water lines that may be concealed
in the wall.
INSTALLATION INSTRUCTIONS
Hardware Used
Shelf Pin
x 12
BB
Baseboard
2
A
3
1
BB
2
C
