11
F
C
Power Function:
Flame Button:
Flame Brightness
Flame Color
• The FLAME ICON controls both the Flame Brightness and the Flame Color. Press the FLAME ICON to
cycle through and select either the Flame Brightness (FL) or the Flame Color (FC).
OPERATING INSTRUCTIONS
Remote Control
Control Panel
Setting
Color
FC1
Yellow
FC2
FC3
FC4
FC5
Blue
Red
Blue + Red
Blue
FC6
Auto Change
F
C
•
Note:
The control panel is a touch screen. It will appear black. Touch the control panel once to
“wake up” the controls. This will cause the controls to light up. Which ever icon you touch will display
it’s last setting when you do this. At this time you can press the corresponding icon to the function you
would like to adjust. After 5 seconds the touch screen will fade to black.
• When the unit is in OFF mode, the POWER symbol LED will Semi-bright. When power OFF, unit will be
stopped, if heater is working before power OFF the unit, fan will have 20 seconds delay to ensure heat
will not be trapped inside the unit.
• Press the FLAME ICON (either FL0, FL1, FL2, FL3, FL4, FL5 can be showing) then press the UP ICON
(+) or the DOWN ICON (-) to adjust the Flame Brightness.
• Press the FLAME ICON (either FC0, FC1, FC2, FC3, FC4, FC5 can be showing) then press the UP
ICON (+) or the DOWN ICON (-) to adjust the Flame Color.
