SCOTT MILLER PRODUCT USER MANUAL
P a g e
4 | 12
Operating Instructions
Assemble the unit
Note: Before assembling the extended tube, ensure that the vacuum cleaner is not connected to the
charger.
1.
Remove the vacuum cleaner, extended tube and floor brush from the box.
2.
Insert the extended tube into the suction inlet of the handheld vacuum cleaner. A “click” sound
indicates that the extended tube has been assembled correctly. P Ensure that the extended tube
is inserted correctly before starting to use the vacuum cleaner.
3.
Connect the floor brush to the extended tube and firmly push the vacuum cleaner towards the
tube and floor brush.
Charging your vacuum cleaner
Note: The vacuum cleaner and power floor brush will not work when it is being charged.
1.
Place the unit or vacuum cleaner near an electrical power outlet and plug in the charger.
2.
Connect the charger to the charging socket. The battery status indicator will light on to indicate
that the vacuum
cleaner is properly connected to the charger and that the unit is being charged.
All the 3 indicator lights will turn off 4.5 hours after reaching full charge.
