ENGLISH
ENGLISH
•
SET-UP OF OTHER SHOCK MODELS
SCOTT strongly recommends using only the FOX Nude (FOX CTD shock) with the
Genius bike
, as we designed both parts for a perfect matching combination with a linear
suspension rate.
Also on those shock models the SAG should be 14/12.5mm.
Other Shock Models on Genius
If you want to use a different rear shock model than the one originally on the bike, please
make sure that the shock will not in any position hit the frame and cause a damage to
the frame.
Please follow the instruction below:
-
Please make sure that the rear shock or its accessory parts do not touch the frame when
mounting or suspending.
-
For doing so release the air/remove the coil, install the shock and compress the shock
completely.
-
If the shock touches the frame while doing so, do not use this shock in order to avoid
damage to frame, swingarm or shock.
•
HEADSET OPTIONS
Genius features a tapered headset and fork steerer
system to match with semi-integrated headsets
of the “50-61”mm range with ID of Headtube of
44.0mm on top and 54.9mm on the lower end.
It is also possible to use forks with a standard 1 1/8” steerer tube when using a reducer
headset such as e.g.
Ritchey WCS Carbon Zero Tapered
PF 50-61mm
18mm UD for 1 1/18" fork
PRD 14860
•
BOTTOM BRACKET (BB) ON GENIUS
All frames of Genius (carbon and alloy) have a BB shell for BB92PF standard.
This matches to several bearing and crankset models of Shimano, SRAM, FSA and others.
Please note that you do not need anymore a spacer on the right side of the bearing cup
between frame housing and bearing cup.
Ritchey WCS Carbon Zero Tapered
PF 50-61mm
18mm UD
PRD 13636
Ritchey PRO Tapered
PF 50-61mm
12 9mm
PRD 13640
19 |
2016 BIKE USER MANUAL |
GENIUS
GENIUS
| 2016 BIKE USER MANUAL
| 18
