GB
-
5
CD OPERATION
Start playback
1. When the unit is switched on, slide the
AM/FM/CD/iPod/AUX
switch to select
“CD” mode.
2. Press the
OPEN
button to open the CD compartment and insert a CD or CD-
R/RW disc into the CD compartment with the label side facing outwards.
3. The unit will read the disc and after reading, the total number of tracks will be
displayed. Press the
button to start playback from the first track. During
playback, the track number is displayed.
Pause playback
Press the
button to pause playback and “ ” will flash. Press it again to resume
playback.
Stop playback
Press the button to stop playback. Then, you can press the
button to start
playback from the first track.
Search function
Skip to next/ previous track
1. Press the
button to skip to the next track.
2. Press the
button to skip to the previous track.
Searching within a track
During playback, hold down the
or
button to go fast backwards or forwards
and then release the button. It will resume normal playback from that point.
REPEAT playback
Press the
REPEAT
button repeatedly to select repeat playback mode:
Press it once to repeat the current track and “REP” is displayed. Press it twice to
repeat all the tracks and “REP ALL” is displayed. Press it a third time to cancel
the repeat function.
PROGRAM playback
This function allows you to program up to 20 tracks to be played in the desired
order.
Note: Programming only works when playback is stopped.
Programming CD tracks
1. In STOP mode, press the
PROG
button and the track number “PROG 01” will
flash.
2. Press the
/
buttons to select a track number.
3. Press the
PROG
button to confirm.
4. Repeat steps 2 and 3 to program the other tracks.
5. To play the program, press the
button.
6. To clear the program, press the button twice, open the CD compartment or
go to standby mode.
