GB
-
7
RANDOM playback (for iPod only)
Press the
SHUFFLE
button on the remote control to play the tracks in random
order. Press the
SHUFFLE
button again to cancel the function.
Watch videos or pictures from your iPod
If your iPod contains videos or pictures, you can view them on an external video
device (e.g. a TV).
1. Open the connection jacks cover.
2. Connect the VIDEO IN jack on the external video device to the unit’s VIDEO
OUT jack with a video cable (not supplied) to transmit the video signal from
your iPod to the external device
.
Next, refer to “Listening to your iPod”.
The setting “TV OUT” on your iPod must be set to “ON”.
Note:
•
The iPod’s internal battery charges until it is fully charged.
• Adjust the volume control on the unit to the desired volume level.
• To prevent sound distortion during iPod playback on this unit, the EQ function
in your iPod must be set to “Off”.
• The unit is not designed for playing and charging an iPod shuffle, but it is
possible to connect the iPod’s line out or headphones jack to the
AUX IN
jack
on the unit.
AUX IN FUNCTION
This unit has an
AUX IN
jack which allows you to connect it to an external audio
device such as an MP3 player or earlier iPod model.
1.
Open the connection jacks cover and
connect a 3.5mm stereo connection
cable (not supplied) to the
AUX IN
jack
at
the
back
of the unit and the
phones/line out jack on your external audio device.
2. When the unit is switched on,
slide the
AM/FM/CD/iPod/AUX
switch
to
“
iPod/
AUX
” mode
.
3. Operate your external audio device as usual to select and play music.
4. Adjust the volume controls on both your external audio device and this unit to
the desired volume level.
Note:
When an iPod is docked, and the unit is in iPod mode, plugging the
connection cable into the AUX IN jack in iPod mode will shut off the sound
output from the iPod. The unit will automatically switch to
AUX
mode and
the sound will be emitted from the external device connected to the AUX
input.
In AUX mode, this unit display cannot show any music information (e.g.
track number) for your external audio device.
MAINTENANCE
Care and maintenance
To clean the casing, unplug the unit and wipe off dust and stains with a soft cloth
moistened with a mild soap and water solution only. Do not use benzene, thinner
or similar chemicals to clean the casing.
