background image

Thoroughly inspect the area where the product is to be used 
and remove all stones, sticks, wires, and other foreign objects.  

Blades coming in contact with a “live” wire may make exposed 
metal parts of the product “live” and could give the operator an 
electric shock.  

Before use, always visually inspect to ensure blades, blade 
bolts, and cutter assembly are not worn or damaged. If

 

any

 

parts

 

are

 

damaged

 

or

 

missing, please call 1-800-618-7474 for 

assistance.  

Always wear safety glasses or eye shields during operation or 
while performing an adjustment or repair to protect eyes from 
foreign objects that may be thrown from the product.  

Never attempt to make any adjustments while the product is 
running.  

Secure long hair so it is above shoulder level to prevent       
entanglement in moving parts.  

Ensure before each use that all controls and safety devices 
function correctly. Do not use the product if the “off” switch does 
not stop the product. 

BATTERY TOOLS USE AND CARE 

 

Recharge only with 

Scotts 20V charger (CHL82000)

. A 

charger that is suitable for one type of battery pack may create 
a risk of fire when used with another battery pack. 

Use appliances only with 

Scotts 20V lithium-ion battery 

packs (BL82120).

 Use of any other battery packs may create a 

risk of injury and fire. See Charger Manual.  
When battery pack is not in use, keep it away from other metal 
objects, like paper clips, coins, keys, nails, screws or other 
small metal objects, that can make a connection from one     
terminal to another. Shorting the battery terminals together may 
cause burns or a fire.  

Under abusive conditions, liquid may be ejected from the      
battery; avoid contact. If contact accidentally occurs, flush with 
water. If liquid contacts eyes, additionally seek medical help. 
Liquid ejected from the battery may cause irritation or burns.  

Do not use a battery pack or tool that is damaged or modified. 
Damaged or modified batteries may exhibit unpredictable    
behavior resulting in fire, explosion or risk of injury.  

Do not expose a battery pack or tool to fire or excessive       
temperature. Exposure to fire or temperature above 130°C may 
cause explosion.  

Follow all charging instructions and do not charge the battery 
pack or tool outside the temperature range specified in the    
instructions. Charging improperly or at temperatures outside the 
specified range may damage the battery and increase the risk 
of fire. 

REEL MOWER SAFETY WARNINGS 

Always use the product in the daylight or with good artificial 
light.  

Do not operate the product on wet grass or in the rain.  

INTENDED USE 

The powered reel mower is only intended for use outdoors. The 
product is designed for domestic lawn mowing. Both wheels 
should touch the ground while mowing. It is a                         
pedestrian-controlled walk-behind mower designed to be 
pushed by hand. The product should never be operated with the 
wheels off the ground. It should not be ridden on. It should not 
be pulled while powered by the battery. It should not be used to 
cut anything other than domestic grass lawns. Do not use the 
product for any other purpose. 

GENERAL SAFETY RULES 

 

TRAINING 

Read, understand, and follow all instructions on the product and 
in this manual before operating the product. Be thoroughly   
familiar with the controls and the proper use of the product. 
Know how to stop the product and disengage the controls 
quickly.  

This appliance is not intended for use by persons (including 
children) with reduced physical, sensory or mental capabilities, 
or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the appliance 
by a person responsible for their safety. Children should be 
supervised to ensure that they do not play with the appliance.  

Keep bystanders, children and pets 15 ft. away from the area of 
operation. Stop the product if anyone enters the area.  

Keep in mind that the operator or user is responsible for       
accidents or hazards occurring to other people or their property. 

PREPARATION  

While operating the product, always wear adequate garments 
and non-skid safety footwear. Avoid wearing clothing that is 
loose fitting or that has hanging cords or ties; they can be 
caught in moving parts.  

IMPORTANT SAFETY INSTRUCTIONS

 

     

SAFETY INSTRUCTIONS FOR PEDESTRIAN-CONTROLLED 
MOWERS

 

Model 2020-16S

 

 

WARNING:

 

The product is capable of amputating hands and feet, and 
throwing objects. Failure to observe all safety instructions could 
result in serious injury. 

 

WARNING:

 

When using the product, the safety rules must be followed. For 
your own safety and that of bystanders, please read these  
instructions before operating the product. Please keep the  
instructions safe for later use. 

 

WARNING:

 

The product should only be operated with the Scotts 20V,   
lithium-ion

 

battery pack. When using battery-operated       

products, basic safety precautions should always be followed 
to reduce the risk of 

re, leaking batteries and personal injury. 

Summary of Contents for 2020-16S





















































Reviews: