If you drop the trimmer, carefully inspect it for damage. If the blade
is bent or cracked, handles broken or if you see any other condition
that may affect the trimmer’s operation, it must be repaired before
putting it back into use. Call our customer service help line at
1-800-618-7474 for assistance.
CAUTION:
Do not at any time let brake fluids, gasoline, petroleum
based products, penetrating oils, etc., come in contact with plastic
parts. They contain chemicals that can damage, weaken or destroy
plastic.
Make sure the unit is detached from the power supply, then use only
mild soap and a damp cloth to clean the tool. Never let any liquid get
inside the tool; never immerse any part of the tool into a liquid.
IMPORTANT
: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment should be performed by a
qualified individual using only identical replacement parts.
The cutting blades are made from high quality, hardened steel and
with normal usage, they will not require re-sharpening. However, if
you accidentally hit a wire fence, stones, glass or other hard objects,
you may put a nick in the blade. There is no need to remove this
nick as long as it doesn’t interfere with the movement of the blade.
If it does interfere, make sure the unit is detached from the power
supply and use a fine toothed file or sharpening stone to remove the
nick.
Fertilizers and other garden chemicals contain agents which
greatly accelerate the corrosion of metals Do not store the tool
on or adjacent to fertilizers or
chemicals.
LUBRICATE BLADES - Stop
the unit and disconnect the
power cord. Then remove any
debris on blades. Apply a
light machine oil along the
edge of the top and bottom
blade supports. Make sure
handles remain clean and
dry.
MAINTENANCE
TROUBLE SHOOTING
Problem Possible
Cause
Possible
Solution
Unit does not run
Extension cord not connected to
the plug
Check extension cord is fully connected to tool
Cord not connected to power
source
Check extension cord is fully connected to a live receptacle
Trigger switch not fully operated
Check that safety lock of button is fully forward prior to moving
trigger
Slow running, noisy or hot blades
Dry, corroded blades
Lubricate blades
Blades or blade support bent
Straighten blade or blade support
Bent or damaged teeth
Straighten teeth
Loose blade bolts
Tighten blade bolts
CALL US FIRST !!
Call us first with questions about operating or maintaining your hedge trimmer
at 1.800.618.7474 between 8:00 a.m. – 5:00 p.m. Eastern Standard Time, or get assistance on
scotts.americanlawnmower.com.
6
Model HT10020S
For parts or service, please call 1-800-618-7474 or visit us online at
scotts.americanlawnmower.com. Be sure to provide all relevant information when you call or
visit.
REPAIR PARTS (KITS/ ITEMS)
The model/ serial number of this tool is found on a plate or label attached to the housing. Please
record the serial number in the space provided below.
MODEL NUMBER
HT10020S
__
SERIAL NUMBER____________
