MG984G
Series
9
•
PIR Trigger/Sensitivity must NOT be set to OFF
•
The Time Lapse interval must be set to a
non-zero value.
The camera will capture pictures or video when motion is
detected and at the preset time(s), regardless of
motion detection.
●
If PIR Trigger/Sensitivity and Time Lapse options are
BOTH OFF, the camera will not capture any photos or
videos.
Additional PIR settings to note:
•
PIR Interval
This setting indicates how long the PIR sensor will be
disabled after each camera triggering. During this
interval time, the camera will not react to any
detected motion or activate at the scheduled Time
Lapse interval.
Further detailed information about the trigger modes can
be found in
Camera Setup Options
section of the manual.