25
second delay. Press the
►
or
keys to decrease or
increase the video length.
Default: 10 seconds
Clock Settings
Set Clock
Set the cameras date and time. The date format is
month/day/year. The time format is hour: minute:
second. The valid values for the year are between
2017 and 2050.
Time Lapse
The camera can capture images or videos at a
preset time interval regardless of motion
detection. Changing this setting to a non-zero
value turns on Time Lapse mode and the camera will
take photos at the set interval time – Values range
from 5 minutes to a maximum of 8 hours.
If PIR
Trigger/Sensitivity and Time Lapse options are
BOTH OFF, the camera will not capture any
photos or videos.
Default: OFF
PIR Trigger/
Sensitivity
This setting is for the sensitivity of the PIR
sensor. There are four sensitivity parameters:
High, Normal, Low and Off. It is recommended to
use HIGH sensitivity in areas with little
environmental interference and also for warmer,
humid temperatures or climates. Use LOW
sensitivity for areas that have a lot of
interference. The sensitivity of the PIR is effected by
temperature. Higher temperatures leads to lower
sensitivity.
If PIR Trigger/Sensitivity and Time Lapse
options are BOTH OFF, the camera will not
capture any photos or videos.
Default: Normal
PIR Interval
This setting indicates how long the PIR sensor will
be disabled after each camera triggering. During
this time the PIR sensor will not react to any
detected
motion
or
scheduled
timer
functions. The PIR Interval can be set between
zero seconds to a maximum of 1 hour. Press
MG984G
Series
