SG560K-8M
4 Advanced Operations
images or videos at a preset time intervals regardless of weather there are motions get detected.
The default parameter is
OFF
which means the timer function is disabled. When changing this
parameter to a non-zero value, it starts to take photos at given time interval. The value ranges
from 10 seconds to 8 hours. Press
“
◄
”
and
“
►
”
to decreases or increases the value.
The following shows how to set timer interval to
1 hour
provided that the previous value is
OFF
.
e) Press
MENU
to display the setting menu.
f) Press
“
▲
”
or
“
▼
”
to select
Timer
Interval
.
g) Press
“
►
”
to decrease or increase to
1 hour
.
h) Press
OK
to save the current setting and the option will be un-highlighted.
Press
MENU
to cancel setting and return to info display.
4.1.11
Set Timer Switch
This parameter defines a certain time lapse in a day when the camera can be triggered,
while in the rest of the time lapse the device is shut off. The effective value ranges from 00:00:00
to 23:59:59.
Timer Switch OFF means the camera works all along; Timer switch ON means the camera
works only during the time lapse according to the preset settings.
Please note that the Timer switch functions only when the timer is set as
On
. Provided that
the camera works from 08:00 a.m. to 17:00 p.m., the steps are as following:
a) Press
MENU
to display the setting menu.
b) Press
“
▲
”
or
“
▼
”
to select
Timer Switch
.
c) Press
“
►
”
to select
On
.
d) Press
OK
to enter into submenu.
e) Press
“
►
”
to select item, press
“
▲
”
or
“
▼
”
to change the value until the start time
changes to 8 and the stop time changes to 17.
f) Press
OK
to save all current setting and the option will be un-highlighted.
Press
MENU
to return to previous menu.
4.1.12
Set Time Stamp
This parameter defines whether the date and time be stamped in the pictures and video
clips or not. The following shows you how to set time stamp as “Off” provided that the previous
value is “On” in MENU state.
a) Press
MENU
to display the setting menu.
b) Press
“
▲
”
or
“
▼
”
to select
Time Stamp
.
c)
Press
“
►
”
to select
Off
.
d)
Press
OK
to save the current setting and the option will be un-highlighted.
Press
MENU
to cancel setting and return to info display.
4.1.13
Reset to Default Settings
To reset the setting to the default values, the steps are as follows:
a) Press
MENU
to display the setting menu.
b) Press
“
▲
”
or
“
▼
”
to select
Reset
.
c) Press
OK
to reset to default settings and return to info display.
Press
MENU
to cancel setting and return to info display.
Page 10
