Setting Up Your Scout to Operate Your TV
Turn on your TV.
1.
Press and hold the
SETUP
button until the Scout's red light blinks twice. Release the
SETUP
button.
2.
Enter the first 3-digit
setup code
for your brand of television. If you entered the code correctly, the
Scout's red light will blink twice.
3.
Aim the Scout at your television and press the
TV
button. Your television should turn off. If your
television does not turn off, repeat steps 1 - 3 trying each code for you brand of TV until you find the
code that operates your television.
4.
Note: Since the Scout is only designed to operate Televisions and cable converters, the
Scout is not able to operate TV/VCR combinations.
Back to Top
Searching for Your Television Code
Turn on your television.
1.
Press and hold the
SETUP
button until the Scout's red light blinks twice. Release the
SETUP
button.
2.
Press the following buttons:
9
,
9
, and
1
. The Scout's red light will blink twice
3.
Aim the Scout at your Television and slowly alternate between pressing the
TV
and
MUTE
buttons
until your television mutes (make sure the sound on your TV is turned up). You may have to press
this sequence of buttons up to 100 times to search the entire library of codes.
4.
Once your television mutes, press and release the
SETUP
button to lock in your code. Your Scout is
ready to operate your television.
5.
Back to Top
Getting Codes from Your Scout
If you need to find out which three-digit code is operating your television after your television is set up, use
this procedure:
Press and hold the
SETUP
button until the Scout's red light blinks twice, then release the
SETUP
button.
1.
Press the following buttons:
9
,
9
, and
0
. The Scout's red light will blink twice.
2.
For the first digit if your three digit code, press the
1
button, wait and count the number of times the
Scout's red light blinks. If the light does not blink when you press the
1
button, the digit is zero.
3.
For the second digit of your three digit code, press the
2
button, wait and count the number of times
the Scout's red light blinks. If the light does not blink when you press the
2
button, the digit is zero.
4.
For the third digit of your three digit code, press the
3
button, wait and count the number of times the
Scout's red light blinks. If the light does not blink when you press the
3
button, the digit is zero.
5.
Now you have the 3-digit code for your television.
6.
Back to Top
Volume Lock
If your television is not remote controllable or, if you have a TV/VCR combination, you can access the
volume of your cable converter. To change the volume setting on the Scout, use the following:
Press and hold the
SETUP
button until Scout's red light blinks twice, then release the
SETUP
button.
1.
