HC-SG550M 3 Item Settings
Page
13
easily to be triggered by motion, taking
more pictures or recording more videos.
It is recommended to use high sensitivity
degree in room or environment with little
interference, and to use lower sensitivity
for outdoor or environment with lots of
interference like hot wind, smoke, near
window etc. Furthermore, the sensitivity
of the PIR is strongly related to the
temperature. Higher temperature leads
to lower sensitivity. Therefore it is
suggested to set a higher sensitivity for
high temperature environment.
Please note that if the Time Lapse is
set to Off, then the PIR Trigger
can’t be set to Off
.
PIR
Interva
l
This parameter indicates how long the
PIR (Passive Infrared motion sensor) will
be disabled after each triggering in ON
mode. During this time the PIR of the
device will not react to the motion of
human (or animals). The minimum
interval is 0 second, it means the PIR
works all the time. The maximum
interval is 1 hour. It means the PIR will
be disabled for 1 hour after each
triggering. Press
LEFT
or
RIGHT
to
decrease or increase the value.
Work
Hour
Choose a time period of a day to let the
camera work. The camera will awake at
the setting time duration in a day. In the
