HC-SG550M 1 Instruction
Page 2
camera and a sound recorder embedded in the
camera. A laser pointer is used to help target the
photo area of the camera.
It is resistant against water and snow. The camera
can also be used as a portable digital camera.
1.3 Remote Control
The remote control is the input device for the
camera and is primarily used for customer settings.
This is an infrared type wireless remote control. The
maximum remote distance is about 30 feet.
Note:
The remote will not work properly without
the antenna attached.
When
power
on
the
camera,
allow
approximately 10-20 seconds for the camera
to acquire a signal. The remote will not
function properly until the camera has
acquired a signal. You can determine that
the camera has acquired a signal by locating
the signal icon on the LCD screen.
Press the punctuation “*” for laser pointer.
