Boly Media
SG550 series
4
Advanced
Operation
(a)
(1)
(b)
(2)
(c)
(3)
Figure 5: Setting camera mode
4.1.2
Formatting the SD-Card
a)
The system will delete all files stored in the SD-card after formatting.
Therefore you should make sure that you have made a backup of important
data. In MENU state press UP or DOWN key until the system enters into the
format menu, shown in the Fig. 6(a) and 6(1).
b)
Press the OK key. Then the system will ask you to decide whether to format
the SD-card or not, shown in the Fig. 6(b) and 6(2).
c)
If you want to proceed the formatting process, pressing the RIGHT key to
change the value to “Yes”.
【
Yes
】
will be highlighted, shown in the Fig. 6(c)
and 6(3).
d)
Press the OK key to start formatting the SD-card. During formatting the guide
information will be changed, shown in the Fig. 6(d) and 6(4). Please note,
you’ll quit the parameter setting without any saving and no parameter is
changed if you press the MENU key at any time before pressing OK key in
step d. After formatting, you can press the UP or DOWN key to set another
parameter, or press the MENU key for leaving the MENU state.
(a)
(1)
Page 11
Boly Media Communications
