SG968K-10M
4 Advanced Operations
Page 12
camera is more easily triggered by motion, taking
more pictures or recording more videos. It is
recommended to use high sensitivity degree in a
room or environment with little interference, and
to use lower sensitivity for outdoor or
environment with lots of interference like hot
wind, smoke, near window etc. Furthermore, the
sensitivity of the PIR is strongly related to the
temperature. Higher temperature leads to lower
sensitivity. Therefore it is suggested to set a
higher
sensitivity
for
high
temperature
environment.
Please note that if the time lapse is set to
Off, then the PIR can’t be set to Off.
PIR Interval
This parameter means how long the PIR sensor
will be inactive after each triggering in ON mode.
During this time the PIR of the device will not
react to the motion of human (or animals). The
minimum interval is 0 second (meaning the PIR
works all the time). The maximum interval is 1
hour (meaning the PIR will be disabled for 1 hour
after each triggering). Please note that there are a
few seconds of internal processing delay between
each trigger, even if 0 second is set.
Camera Posit
It means camera position. You can set A-Z
position for your camera, so that you can
