SG968K-10M
2 Cautions
Page
5
2
Cautions
The working voltage of the camera is 6V.
The camera is
supplied by four AA batteries.
Please install batteries according to shown polarity.
Must insert the SD card before power on camera. The
camera will not work properly unless a working SD
card is detected by the camera
Please unlock the write-protect before inserting the SD card.
Please insert the SD card when the power switch is at
OFF
position before testing the camera. The camera has no
internal memory for saving images or videos. If no SD card is
inserted, the camera will shut down automatically after a
continuous indication sound.
Please do not insert or take out the SD card when the power
switch is at
ON
position.
It is recommended to format the SD card by the camera when
used for the first time. Many other SD cards formatted by
other cameras have poor compatibility with different brands
of cameras. So it is best to format the SD card with this
camera or on a computer.
In the
SETUP mode
,
the camera will shut down
automatically after 3 minutes if no operation is done.
Please turn on the power again if you want to continue to
work with the control.
